the no.1 choice of theraphy Clinic, Spa massage Parlor ..

What is Ion Cleanse?
 
An Ion Cleanse draws waste from the body through a unit placed in water with a positive and negative electric current.It is similar to walking in the sand along the beach only more powerful because your feet are in direct contact with the ions being made in the water.A machine is used which produces a constant supply of negative and positive ions which are brought inside the body through opened pores of the feet soaked in warm water.These ions attach themselves to toxins which are positively charged, and then exit in the same way.Once they exit through the pores of our feet they come into contact with the surrounding air thus creating a solid, visible color.
 
How does it work?
With the ion cell cleansing the cells are brought back to balanced state by eliminating the toxins attached to them.When cells are fully charged, they have more oxygen and are able to experience electrical balanced state which results to a feeling of healthy attitude, vitality, well-being andenables the body to heal itself because of improved immune system.Studies have shown that detoxification machines improve oxygen levels.


Preventive vs. Cure
The machine does not aim to cure but is aimed to prevent some illnesses because of the increased immunity and oxygen level.Some benefits associated may come in the form of liver detoxification, stress reduction and energy and vitality increase, improved sense of awareness, reduction in menopause symptoms, menstrual cramps, skin problems, acne sleep problems, fats, blood sugar, sexual health problems, toothaches, restlessness, wrinkles, yeast infections, strengthening of joints, removal of skin ailments such as rashes, eye bags and blotched complexions.

 
 

Operating Instruction of e-plus Ion-Cleanse Device

  1. Always fill in health status form before the treatment. (provided by the company)
  2. Insert the plug of electrodes to the front panel of the display board.
  3. Plug in the cable of transformer to the back panel of display board, whereas the other end of the cable will be plug in to the power supply.
  4. Put the electrodes 5-6 cm deep under the water. Please ensure that the central part of the copper plate is covered by water.
    Note: The water level must not exceed over the top of electrodes, or all parts would be corroded and greatly influence the function of the device.
  5. Muscle testing is not necessary for ordinary treatment; connect the electricity by switching on the button.
  6. Plug the cable of the array into the unit, turn right to lock and left to unlock.
  7. Press button ‘OK’ and start to choose the treatment options that are shown on the screen, press [+] or [-] to adjust an appropriate options for treatment. There are 5 different treatment options. (Option 3 is commonly used by normal user)
  8. After choosing the option, soak feet in the water, then press button ‘OK’ and set the time duration for treatment. The time setting can be adjusted by pressing [+] or [-].
  9. Press OK to confirm, and press START to run the cleansing process
  10. panel display (A) ampere 0.10 - 1.00, add a bit of salt into the water until (A) ampere become 1.7-2.1
    TThe quality of water varies in different places. (A) ampere is capable of measuring the residue and conductivity of the water, if the water is over (A) ampere 1.00, please replace with water processed by carbonization/fibre filters.
  11. There is always some information displayed after each foot bath.
  12. The electrode plate must be disinfected by washing with hot water, bleach or cleaner after each treatment.

Instructions for new Array (Use first time 'without feet'):

1) Use a small plastic container, add warm water and put in new Array. Water should be at the screw level without feet.

2) Add a tea spoon of laundry or washing powder into the warm water. Add salt until the Ampere (A) reaches 2.2 to 2.3.

3) Use Mode 2 (all negative) and run for 30 minutes 'without feet'.

Note: The above is to get rid of the rust proof layer protecting the metal Array.

Please follow the above instructions for all new Arrays and you will get good result on the subsequent therapies with feet.

Mode selection

Although there are 5 treatment options, we suggest choosing option 3, 4 ,5 mode.

  1. 100+ can only be used for clinical test. (use only after consulted the doctor)
  2. 100- can only be used for clinical test. (use only after consulted the doctor)
    Neither 100+ nor 100- will cause imbalance in pH level.
  3. 70+ (positive charged)/ 30- (negative charged), this setting can be used by anyone. (weaker )
  4. 15+ (positive charged)/10-(negative charged) /5+ (positive charged) (moderate)
  5. 10- (negative charged)/15+(positive charged) /5- (negative charged) (stronger)
  6. From thousands cases of experiments that had been conducted, users who get the result of positive from muscle testing should choose 4, and alternatively, choose 5.

Rules of Usage

  1. Always fill in health status form before the treatment. (provided by the company)
  2. Only two legs are allowed throughout the whole process of the treatment.
  3. Water can only be used once.
  4. The duration of each treatment must not be more than 30 minutes.
  5. children over the age of 5 may take the treatment under the accompany and supervision of the parents. The duration should be 15-20 minutes.
  6. People below the age of 50 may use once every two days. A break of 3 weeks after every consecutive 14 treatments.
  7. People above the age of 50 may use once every three days. A break of 2 weeks after every consecutive 14 treatments.
  8. During the foot bath, remove the legs should you feel uncomfortable, and off the unit instantly.
    (Then try with a weaker mode within 24 hours)
  9. Adopt a surge-protector during storm or unfavorable weather.
  10. Do not let the person have close contacts with those whom are not undergoing the session.
  11. Do not sit on metalic seat.
  12. Remove metal items like watches, coins, glasses and necklaces etc.
  13. Do not use RO water, distilled water and processed water.
    (water processed by normal fibre /carbonization filter is recommended)
  14. Always off the power supply when the unit is not in use.

Recommended schedule and functions

1) 5 to 17 years old: Below are 14 session's schedule (use for 20 mins only each session) :
Session
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Function
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Once every 2 days, use 14 sessions to complete a course. Rest for 1 month before repeating the course.

2) 18 to 50 years: Below are 14 session's schedule:
Session
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Function
3
3
3
4
4
4
4
5
5
5
5
5
5
5
Once every 2 days, use 14 sessions to complete a course. Rest for 3 weeks before repeating the course.

3) 50 years and above, below are 14 session's schedule:
Session
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Function
3
3
3
3
4
4
4
4
5
5
5
5
5
5
Once every 3 days, use 14 sessions to complete a course. Rest for 2 weeks before repeating the course.

Maintenance and Repairing

  1. The surface of the electrodes will become smooth after the ion-cleansing. Fill in about 1000ml of water and a tea spoon of white acidic powder, let it soaks until the next morning. Clean the machine after 5-10 times usages.
  2. Electrode is a depleting material, and the depletion rate depends on the physical health condition of the users and the frequency of usage.
  3. If you encounter any other problems when using this device, please ask for assistance from the agents and manufacturer.

*Note: Color of unit may vary.

http://www.ioncleanse.biz/Download/FAQ(Eng).pdf

 
 

 

EMAIL:  ShoppingBoyDotcom@Gmail.com

SHOPPINGBOY.COM